Electromagnetic Stirring Equipment for Improving Quality of Bloom, Billet, Slab

• Customization: Available
• Customized: Customized
• Condition: New
• Model NO.: DJMR
• Power Source: Electric
• Automatic Grade: Automatic
• Type: Steel-Making Equipment
• Certification: ISO, CE
• Transport Package: Export Wooden Case
• Specification: CE
• Trademark: KMD
• Origin: Yueyang, Hunan

Product Description

Electromagnetic Stirrer System for Bloom, billet, slab

Complete EMS System Configuration

EMS consists of coil, electric controller and cooling water system, electric control system consists of IPC, local control cabinet and inverter cabinet.







Technical Features of KEMEIDA EMS

A new algorithm has been developed by KEMEIDA and GL electromagnetic field software Co., names AGILD EM stirring algorithm, which uses new strip magnetic field differential integral equation.
This software can design electromagnetic parameters optimized. EMS shall be with high magnetic induction and stirring force. So stirring effect shall be great.
Stirring force can be calculated by this software according to different frequency and current. So the best frequency and current can be provided for user.
Optimized design shall be done for L/D. Iron core length shall be increased properly. So stirring effect shall be improved.
Kemeida has also other software for designing F-EMS to calculate best position of F-EMS.
Kemeida EMS uses low voltage and large current, which can avoid damage of peak voltage to insulation. It shall make reduce current leakage and prolong EMS life.
Frequency arrange shall be widened to choose the best frequency.
Put EMS lower properly to make magnetic field around meniscus as little as possible to ensure strong magnetic field.



Metallurgical Effect

(1).  Improving sub-surface and inner quality of steel

Increase equiaxed zone;

Reduce central segregation, porosity and shrinkage efficiency;

Reduce air holes,

pinholes and inclusion in the surface and subsurface;

Make surface temperature of slab symmetrical

Reduce inner cracks;

(2). Relax continuous casting production condition

Superheating ratio;

Caster centering;

(3). Expending steel grade

Rimming steel;

Free cutting steel;

Ball bearing steel

Bearing quality steel and so on;
 

According to different installation positions and  combinations are divided into three modules as following: 

(1) Mould EMS:MEMS:

EMS is Installed the mould zone, adopting rotary magnetic field. The rotary motion will be grow up in liquid steel

(2) Strand EMS:SEMS

EMS is installed the secondary cooling zone, adopting the rotary magnetic field or traveling wave field. The rotary motion or rectilinear motion will be grow up in liquid steel.

(3) Final Solidification Zone:FEMS

EMS is Installed the mould zone, normally, adopting rotary magnetic field. The rotary motion will be grow up in liquid steel.

 

Different metallurgical effect for installation position

Type	Feature	Metallurgical effect	Application steel
M-EMS	cleaning solidification surface Cutting crystal Reducing overheat	Increasing the equiaxed rate  Reducing surface and sub-surface air hole and pinhole  Reducing surface and sub-surface slag including Homogenize solidified shell  Improving center shrinkage and center segregation	Low alloy steel Spring steel Cold roll steel Medium and high carbon steel
S-EMS	Cutting crystal  Reducing overheat	Expand the equiazed rate Reducing the inner crack  Improving shrinkage Reducing center porosity	Stainless steel  Tool steel
F-EMS	Well-distributed the element of liquid steel Break the columns crystal	Refining grains  Improving the center segregation and V type segregation effectively  Improving the center shrinkage and porosity	Spring steel Bear steel Special high carbon steel

 



Guide for Model Selection

1. Arc radius of CCM, Strand space, pulling speed.
2. Parameters of Mould.
3. Steel grade, Cross section.
4. Power phase.



KMD Introduction:

Established year: 1997
Staffs: 800
Workshop area: 90000 m²
Engineer team: 180
Exported countries: 50, including India, Pakistan, Malaysia, Vietnam, Myanmar, Laos, Phillipines, Indonesia, USA, Spain, Turkey, Russia, Ukrain, Saudi Arabia, etc.
Certifications: CE, ISO9001, ISA


Exhibition all over the world



Clients

Guided by managing conception as
Guided the direction by advanced technology,
Exploited the market by perfect service
Building the reputation by excellent quality.

FAQ

Q1.Are you factory?
Yes. We are lifting electromagnet factory, and we also factory for electromagnet stirrer, control cabinet, cable reel, electromagnetic separator, and mandrel since 1997. With 23 years history our clients are more than 2000, and export more than 50 countries. Our plant area is more than 60,000 square meters.

Q2.How fast can i get the quotation?

A: We usually quote within 24 hours after we get your inquiry.If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.

 

Q3. What's your payment terms?
A: T/T, DP or L/C AT SIGHT for first cooperation..

 

Q4.Can I get sample before order? 
A: Yes, of course. After price confirmation, you can require for samples to check our quality, but the freight is on your site.
 

Q5. Do you accept OEM?

A: Yes. We accept custom design OEM.
 

Q6. How do you make our business long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers benefit;

 2. We respect every customer as our friend and we sincerely do business and make friends with them, no  matter where they come from.